USER MANUAL ECO.32-T Magnetic Drilling Machine SERIAL NO.____________ DATE OF PURCHASE __________ EUROBOOR FOR PROFESSIONALS BY PROFE
ISSUE 1/Original version/OCT 2013 10 10 DESCRIPTION (fig. 1) WARNING: Never modify the power tool or any part of it. Damage or personal injury could
ISSUE 1/Original version/OCT 2013 11 11 EXTENSION CABLE If an extension cable is required, use an approved 3-core extension cable suitable for the po
ISSUE 1/Original version/OCT 2013 12 12 INSERTING AND REMOVING AN ACCESSORY (FIG. 1) The tool holder accepts annular cutters with a 19,05 mm Weldon s
ISSUE 1/Original version/OCT 2013 13 13 TURNING MACHINE ON AND OFF THE CONTROL PANEL The control panel on your magnetic drilling machine is designe
ISSUE 1/Original version/OCT 2013 14 14 DRILLING A HOLE Now that you have read the explanatory information and safety recommendations above, you are
ISSUE 1/Original version/OCT 2013 15 15 Some materials of low hardness contain abrasive substances leading to rapid cutting edge wear at high speeds.
ISSUE 1/Original version/OCT 2013 16 16 LUBRICATION IN HORIZONTAL APPLICATIONS Adjust the fluid flow as required using the flow regulator; Add
ISSUE 1/Original version/OCT 2013 17 17 MAINTENANCE Your EUROBOOR power tool has been designed to operate over a long period of time with a minimum o
ISSUE 1/Original version/OCT 2013 18 18 ADJUSTMENT OF SLIDE An essential requirement of the machine is that the slide can move in a smooth and contro
ISSUE 1/Original version/OCT 2013 19 19 TROUBLE SHOOTING Magnet and motor do not function - The magnet switch is not connected to the power supply -
ISSUE 1/Original version/OCT 2013 2 2 Congratulations on your purchase of the Euroboor ECO.32-T Portable Magnetic Drilling machine. Your model is de
ISSUE 1/Original version/OCT 2013 20 20 Frame under voltage - Damaged / defective wiring - Defective magnet - Motor seriously dirty Fuse blows when m
ISSUE 1/Original version/OCT 2013 21 21 SPARE PART LIST AND EXPLODED VIEW of ECO.32-T Nr.: Article: Description Nr.: Article: Descripti
ISSUE 1/Original version/OCT 2013 22 22 EXPLODED VIEW of ECO.32-T
ISSUE 1/Original version/OCT 2013 23 23
ISSUE 1/Original version/OCT 2013 24 24 CE/EMC DECLARATION OF CONFORMITY DECLARING: EUROBOOR BV Kryptonstraat 110 Zoetermeer The Netherlands th
ISSUE 1/Original version/OCT 2013 3 3 Fig. 1
ISSUE 1/Original version/OCT 2013 4 4 Symbol Term, meaning Explanation Read documentation Be absolutely sure to read the enclosed documentation su
ISSUE 1/Original version/OCT 2013 5 5 GENERAL POWER TOOL SAFETY WARNINGS Do not use this power tool before you have thoroughly read and completely u
ISSUE 1/Original version/OCT 2013 6 6 4. Never place hands, fingers, gloves or clothing near cutting area or rotating machine parts. 5. Remove adju
ISSUE 1/Original version/OCT 2013 7 7 ADDITIONAL SPECIFIC SAFETY RULES FOR MAGNETIC DRILLING MACHINES • Keep your fingers well out of the drill are
ISSUE 1/Original version/OCT 2013 8 8 Markings on Tool The following pictograms are shown on the tool: Read instruction manual before use. Wear
ISSUE 1/Original version/OCT 2013 9 9 TECHNICAL DATA ECO.32-T ANNULAR CUTTERS ø 12 - 32 mm TWIST DRILLS ø 1 - 13 mm THREADING M3 - M12
Comments to this Manuals